1.

Screw the track firmly into the wall studs using cabinet screws or other appropriate fasteners for your type of wall. For brick or masonry walls you will need to drill the walls with a masonry drill and use wall plugs. The "V" groove in the track serves as a guide for placement of the drill holes.

2.

Fit the cable into the track slide and slide it into the track. It will slide to any position along the track. The track slide is designed so that it can be fit into the track or removed at any point along its length, or it can slide in from the end. This means less disturbing other works when re-hanging.

3.

Fit the hook onto the cable and adjust it up or down to the position you want. Lock the hook into place with the key provided in the pack. The cable is then clamped between two metal surfaces in the hook to provide a very powerful grip, and it won't bend or mark the cable when you move the hook. Also, you can put more than one hook on a cable.

4.

The optional wood moulding can be fit over the track to fully cover the track and give a more traditional look, if that suits your decor. .

Figuring Your Gallery System Requirements